5
1.2 MATERIAL HANDLING
The Horizontal Entry Arm, when combined with a suitable
Irudek
Products mounting base and winch,
may be used for the raising and lowering of tools, equipment, and other material not exceeding the
rated Working Load Limit of any system component.
NOTE: Some jurisdictions may not allow the use of the same equipment to move personnel and
material. Be aware of and follow the regulations governing your workplace.
2.0 APPLICATION RESTRICTIONS
There are restrictions and limitations that must be carefully considered in the selection, installation, and
operation of this type of equipment. Serious injury or death may result from failure to consider these
factors.
2.1 WORKING LOAD LIMIT
The Horizontal Entry Arm is designed and rated
for a working load limit of 1 person weighing a
maximum of 310lbs (including all clothing, tools,
and equipment) when used in a 1 Part Single
Reeved System as shown in Figure 3.
2.2 SITE CHARACTERISTICS, PHYSICAL and
ENVIRONMENTAL FACTORS
Individual work sites have associated with them any of a number of hazards related to the site itself and
the activities being carried out at that site. These may include, but are not limited to poisonous or
explosive atmospheric conditions, poisonous or corrosive chemical hazards, hot surfaces, electrical
hazards, sharp edges, engulfment hazards, or moving machinery.
All of these factors must be taken into consideration when selecting equipment for a given application.
3.0 GENERAL SYSTEM REQUIREMENTS
The Horizontal Entry Arm is designed for use with a variety of accessories to perform many functions.
There are basic requirements common to all such systems that include, but are not limited to, the
following.
Figure 3:
Side
Entry
Operation and Maintenance Manual