IROX PRO-EC, User Manual

Page: 28 / 33

28 29
Troubleshooting
The display shows dashes “---” for weather parameter(s)
The display will show “---” when the wireless link is lost with the remote sensor for the
following periods:
Thermo-hygro Sensor – 15 minutes
UV Sensor – 30 minutes
Anemometer (Wind Sensor) – 15 minutes
Rain Sensor – 30 minutes
Check or replace the batteries for the corresponding sensor. Then press and hold DOWN
to enforce a search for all remote signals.
If the above does not solve the problem, check the wireless transmission path from the
corresponding sensor to the main console unit and change their locations if necessary.
Although wireless signals can pass through solid objects and walls, the sensor should
ideally be within the line of sight of the console unit.
The following may be the cause of reception problems:
- Distance between remote sensor and main console unit too long. (Maximum
transmission distance in open area conditions is 100m)
- Signal shielding materials such as metal surfaces, concrete walls or dense vegetation in
the path of transmission.
- Interferences from wireless devices (such as cordless phones, radio headsets, baby
listening devices) and electronic appliances.
The weather readings do not correlate with measurements from TV, radio or official
weather reports.
Weather data can vary considerably due to different environmental conditions and
placement of weather sensors.
Check the placement tips included in this manual to site your sensors in the best possible way.
The weather forecast is inaccurate.
The weather forecast is a prediction of weather after 12-24 hours, and may not reflect
current weather conditions.
PRECAUTIONS
This product is engineered to give you years of satisfactory service if you handle it
carefully. Here are a few precautions:
1. Do not immerse the unit in water.
2. Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic
parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which
may result in malfunction, shorter electronic life span, damaged battery and distorted parts.
4. Do not tamper with the unit’s internal components. Doing so will invalidate the warranty
on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts.
5. Only use fresh batteries as specified in the user’s manual. Do not mix new and old
batteries as the old ones may leak.
6. Always read the user’s manual thoroughly before operating the unit.
CAUTION
- The content of this manual is subject to change without further notice.
- Due to printing limitation, the displays shown in this manual may differ from the actual
display.
- The contents of this manual may not be reproduced without the permission of the
manufacturer.