20
21
Note:
The radio controlled signal for time (HBG) is transmitted from the central atomic
clock in Frankfurt/Main in short intervals. It has a reception range of approx. 1500 km.
Obstructions such as concrete walls can reduce the signal range.
Sunrise/Sunset Mode
The main console unit computes the sunrise and sunset times from the user-configured
location data. This includes the longitude, latitude, time zone and DST (Daylight Saving
Time). Choosing a suitable city code for your area will automatically generate the correct
values for the location data.
Should you wish to input your own location data or if a suitable city code could not be
found, choose “USR” as the city code during setup.
A searching function is also available, which allows the sunrise/sunset times for different
dates to be viewed.
Accessing Sunrise/Sunset Mode
From the main console unit: Press
UP
or
DOWN
until the sunrise and sunset icons
on the lower left of the display start flashing.
From the remote control: Press .
Setting up the Location Data
1. In Sunrise/Sunset Mode, press and hold
SET
to enter location data setup.
2. The city code in the Time and Alarm display should start flashing.
Set City Info:
Press
UP
or
DOWN
to select city code for your local area. Refer to P.XX for a list of
available codes. The corresponding longitude and latitude will be shown along with the city.
Should you wish to input your own geographical coordinates, choose “USR” as the city code
Press
SET
to confirm your selection.
3. If “USR” was chosen, you will be asked to input your geographical coordinates.
Set Degree of Latitude:
Press
UP
or
DOWN
to adjust value. Press and hold either button for fast advance.
Press
SET
to confirm your selection.
4. Repeat above procedure to set minute of latitude, degree of longitude, minute of
longitude, time zone of the city, and DST selection.
5. Upon completion the display will be returned to Sunrise/Sunset Mode.
Note: Press and hold
SET
anytime during the setup to return to normal Clock and Alarm
Mode. All settings made will be discarded.
Viewing the Location Data
In Sunrise/Sunset Mode, each press of
SET
rotates display between:
- Time and sunrise/ sunset Times
- Calendar and sunrise/ sunset Times
- Calendar and longitude/ latitude
Viewing Sunrise/Sunset Times for Different Dates
1. In Sunrise/Sunset Mode, press
MEM
or
MEMORY
.
2. The date should be flashing.
Press
UP
or
DOWN
to adjust date. Press and hold either button for fast advance.
The corresponding sunrise and sunset times will be displayed for the selected date.
3. Press
MEM
or
MEMORY
or
SET
to return display to Sunrise/Sunset Mode.
Summary of Contents for PRO-EC
Page 1: ...1 USER MANUAL PRO X USB ...
