14
15
Using the Different Weather Modes
Pressure and Weather Forecast Mode
This part of the display indicates the current pressure, sea level pressure, weather
forecast, moon phase and pressure trend.
A number of historical statistics can also be viewed, such as the sea-level pressure values
for the last 24 hours, moon phase for the previous and next 39 days, as well as a pressure/
temperature/ humidity history bar-chart.
Pressure values may be displayed inHg, hPa/mBar or mmHg, and altitude values may be
displayed in meters or feet.
Accessing Pressure and Weather Forecast Mode
From the main console unit: Press
UP
or
DOWN
until the weather forecast icon on the
upper left of the display starts flashing.
From the remote control: Press .
Setting Pressure Parameters during Initial Start-Up
During the initial start-up of the main console unit, all functions in Pressure and Weather
Forecast mode will be locked until the pressure settings are configured.
1. Choose Pressure Units:
The unit icon “inHg” or “mmHg” or “hPa/mBar” should be flashing. Press
UP
or
DOWN
to
select pressure unit as inHg, hPa/mBar or mmHg
Press
SET
to confirm your selection.
2. Choose Altitude Units:
Press
UP
or
DOWN
to select altitude unit as feet or meters.
Press
SET
to confirm your selection.
3. Set Altitude:
Press
UP
or
DOWN
to adjust value. Press and hold either button for fast advance.
Press
SET
to confirm your selection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Note: After initial start-up the altitude cannot be adjusted again until the main console unit
is restarted.
Viewing Pressure and Altitude Data
In Pressure and Weather Forecast Mode, each press of
SET
rotates display between:
- Sea level pressure
- Local pressure
- Local altitude
Setting the Sea Level Pressure
1. In Pressure and Weather Forecast Mode, press
SET
until the sea level pressure is
displayed.
2. Press and hold
SET
. The Sea Level Pressure display should be flashing.
3. Set Sea Level Pressure:
Press
UP
or
DOWN
to adjust value. Press and hold either button for fast advance.
Press
SET
to confirm your selection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Summary of Contents for PRO-EC
Page 1: ...1 USER MANUAL PRO X USB ...
