7 OF 20
close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
VIBRATION SAFETY
This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary
or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of
vibration-related injury:
z
Anyone using vibrating tools regularly or for an extended period should first be examined by a
doctor and then have regular medical check-ups to ensure medical problems are not being
caused or worsened from use. Pregnant women or people who have impaired blood
circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s
Disease should not use this tool. If you feel any medical or physical symptoms related to
vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as
soon as possible.
z
Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
z
Use tools with the lowest vibration when there is a choice between different processes.
z
Include vibration-free periods each day of work.
z
Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
z
To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration
occurs, stop use immediately.
UNPACKING
When unpacking, check to make sure that all the parts shown on the Parts List and Diagram are
included. If any parts are missing or broken, please call the distributor at the number shown in this
manual as soon as possible.
SETUP – BEFORE USE:
WARNING:
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the
Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
ASSEMBLY
Attaching the Extension Supports and Miter Lock Handle
1. Insert the ends of the Extension Supports into the holes in the sides of the Base. Tighten the Wing
Screws to hold the Extensions in place. The upper edge of the Extensions will be level with the surface
of the saw. This provides a wider base for the work material to rest on.
2. Thread the Miter Lock Handle into the Plate until securely in place.
Attaching the Dust Collection Bag
3. The Dust Collection Bag slips over the Dust Outlet behind the Blade Housing Assembly. Sawdust
created by cutting is captured in the bag.
MOUNTING THE SAW
The Miter Saw must be mounted on a support before use. This may be a commercially available support or
Summary of Contents for 46463
Page 16: ...16 OF 20 DIAGRAM ...
