Appearance upon completion of Step 8.
8A. Screw in the Ball Knob (102) into the back side of the Attachment Holder
(M).
8B. Insert the Leg Hold Down (P) into the Attachment Holder (M). Adjust the
Ball knob (102) to allow the Leg Hold down (P) to slide down enough to allow
the Ball Knob (102) to lock the Leg Hold Down into place.
8C. Insert the two Foam Roller Tube (Q) parts midway along their length into
the Leg Hold Down (P).
8D. Slide a Foam Roller (222) on to each of the exposed shafts of the two
Foam Roller Tube (Q) parts. Try to keep the Foam Roller Tube centered
during this step, so that each side remains equal in length. In total four Foam
Rollers (222) will be installed.
8E. Insert a Big End Cap (120) into each of the ends of the Foam Roller Tube
(Q). Make sure you have completed step 8E before inserting the four Big End
Cap (120) parts.
STEP
8
26
Summary of Contents for Standard Olympic Weight Bench
