5.3. 4G Modem.
If 4G modem connection type is selected, the interface looks as follows:
Where:
Device:
A drop-down list of all available modems currently connected to device USB port.
APN:
Mobile operator Access Point Name. Can be found from your 4G modem documentation
or obtained from your mobile operator.
After setup is complete, save the parameters by pressing Save button.
5.4
Control Software Connection Mode Tab
If Z-5R WEB is intended to work in network mode, i.e. under external software control, then after
completing LAN connection configuration, it is also necessary to set up the connection mode
between connection module and control software.
Control Software Connection Mode tab allows to select the connection mode to the control
software.
Where:
Authentication Key:
Required when connecting to a cloud-based internet server or when
working via a ZProxy server, and for accessing the controller's Web interface.
Initially this field contains the factory pre-set key, found on a sticker on the back of device casing,
under AUTH_KEY label. If necessary, change the key now. (Only alphanumeric characters
allowed).
Software Connection Mode:
Choose Web, Server, Client for network operation, or Standalone
to operate without a control software connection.
5.4.1 Web
Web connection mode
provides connection to a cloud SaaS (Security as a Service). To set up,
the following parameters are required from SaaS vendor:
Z-5R Web
www.ironlogic.
me
page
13
