www.desatech.com www.ironhaus.com
123126-01A
29
InStaLLatIOn
Continued
CAUTION: Gloves should
be worn when installing module
into fireplace. Metal edges may
be sharp.
1. Plug module into J-Box on the right side
of firebox floor.
2. Connect shutoff valve of module to flexible
gas line.
3. Connect wires from limit switch to module
(see
Wiring Diagram
, page 35).
4. Carefully place module into hearth in
firebox. Attach using 3 screws each on
left and right of module. Be careful not to
chip or break logs.
Figure 32 - Installing Module into Firebox
Figure 33 - Installing Floor Media
Scrap
Logs
Ember
Material
Ember
Flakes
Lava Rock
INSTALLING FLOOR MEDIA
1. Ember flakes should be placed upright
into grooves between ports on ember bed
(see Figure 33).
2. Place lava rock around base of burner on
hearth floor. Make sure burner ports are
not covered.
3. Gloves must be worn when working with
ember material. Pull ember material apart
into pieces no larger than a dime. Place
pieces loosely and sparingly directly over
holes of front burner (ember bed). This
will create a glowing ember appearance
as flame touches ember material. Do
not block pilot ports with embers. It is
not necessary to use all ember material
provided.
4. Place scrap log pieces randomly as de-
sired on fireplace hearth floor around base
of log set.
5. Set andirons in place at sides of grate.
J-Box
Plug
Shutoff
Valve
Andiron
