background image

 

About Your Log Splitter 

 

  

Thank you for purchasing your Iron & Oak log splitter!

 

 

About Your Log Splitter:

  

This log splitter is a machine designed to split wood logs using a hydraulically powered moving wedge.  
The log splitter's gasoline engine is used to pressurize the hydraulic system

 

This log splitter is designed to split logs 

lengthwise with the grain only.  

 

This log splitter model is capable of splitting logs up to 24” long and 16” in diameter. 
 
Your splitter can be used in either a vertical or horizontal splitting position: 

 

When the splitter is set up to operate in the horizontal splitting position, a log is placed on the 
horizontal beam and the wedge moves horizontally into the end of the log to split it. 

 

When the splitter is set up to operate in the vertical splitting position, the log is placed on the 
endplate, upright on its end, and the wedge moves down into the top of the log to split it. 

 
The horizontal splitting position is used for lighter logs that can be easily loaded onto the beam. The 
vertical splitting position is used for heavier logs that are difficult to load onto the beam. 

The technical specifications for your log splitter are provided in the Specifications section of this 
manual.

 

WARNING 

This log splitter uses a high-pressure hydraulic system to generate a very strong splitting 
force. 

Read the manual completely

 before using the machine to understand how to safely operate 

and maintain it.

   

 

Follow all safety precautions presented throughout this manual. A summary of important safety 
information can be found at the end of this manual. 

 

Contact Iron & Oak Product Support at 1-800-817-1005 for any questions about the appropriate 
use of this log splitter and/or optional accessories. 

  

Warranty Registration: 

Please fill out and submit the warranty registration page at the end of the manual so that we have your 
contact information for any future product literature or replacement parts you may need.  You can also 
register online at www.ironandoak.com. 

 

Attention: All Rental Companies and Private Owners who loan this  

equipment to others!

 

All persons to whom you rent/loan the log splitter must have access to and read this manual. Keep this owner's 
manual with the splitter at all times and advise all persons who will operate the machine to read it. You must 
provide instruction on how to safely operate the splitter and remain available to answer any questions a 
renter/borrower might have. 

 

Summary of Contents for BHVH2418GX





















































Reviews: