background image

EN

This is the safety alert symbol. It is used to alert you to potential physical injury hazards.   

Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING: When using an electrical appliance, basic precautions should always be followed, 
including the following:

WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when 
setting up, using and maintaining your robot.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov/product

This appliance can be used by children aged from 8 years and above and persons with  
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they 
have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play with the appliance. Cleaning and user 
maintenance shall not be made by children without supervision. 

Safety Information

Important Safety Information

READ ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

BFP

Risk of electric shock

Class II equipment

Read operator’s 

manual

Risk of fire

For indoor use only

Keep out of reach  

of children

Backfeed Protection

General symbol for 

recycling

Indicates output 

polarity

Rated power 

input, d.c.

Rated power 

output, d.c.

Separate Supply Unit

Rated power 

input, a.c.

Summary of Contents for Roomba e5













Reviews: