6
Min 4x1,5 mm
2
200V - 346V
180V - 380V
50/ 60 Hz
380V - 400V
342V - 440V
50/ 60 Hz
415V - 575V
374V - 632V
50/ 60 Hz
Ref. no. 40-8939-2001-04/1712
WARNING!
Turn off the main switch before any work is carried out
on the electrical circuit.
NOTE
Make sure that the cable covers are tight.
The power supply to the feeder must not be disrupted when
the weaving machine stops.
Variations in main voltage.
Nominal
Voltage
Frequence
Mains supply
Main switch
Emergency stop
Take the Voltage Supply Box out of the packing. Open the
cover and connect the three-phase power cord. (4-wires
cable). Make sure that the earth connection is properly made
The section of each wire cannot be less than 1,5 mm
2
.
Mains connection
NOTE
Condensation can form on the weft feeder when it is moved from the cold environment of the warehouse
to the warmer environment of the loom room. Make sure that the feeder is dry before switching it on.
