24
1
2
3
4
Luna X3, Chrono X3, XD X3, XD X3 Plus
Ref. no. 40-8939-2001-04/1712
WITHOUT CAT
• Switch off the feeder.
• Align the winding disc eyelet (1).
• Open the brush holder (see page 30,32).
• Thread the needle all the way through the
feeder and output eyelet.
• Pull the yarn through.
• Restart the feeder.
WITH CAT
• Switch off the feeder.
• Align the winding disc eyelet.
• Thread the needle through the feeder and
balloon control brush.
• Start the feeder and fill the yarn store.
• Insert the threading needle into the CAT (2) as far
as possible.
• Pulling the yarn (3) will cause it to wrap around the
threading needle.
• When the threading needle is pulled out (4) the yarn
will follow.
WARNING
When using a threading needle, care must be ta-
ken to avoid damaging the Flex brake. Ensure that
the flex holder is in the forward position before
threading.
Threading - manual
