IPU 40108
Page 8 of 29
3.4.3
Buttons
Operation of the IRISYS 4010 imager application is by means of the 4 hot buttons, the 4 directional buttons,
the menu button and the laser button (see Figure 10).
•
The hot buttons are mainly used to give quick control of:
1.
zoom function,
2.
image capture,
3.
measurement cursor selection
4.
auto/manual modes.
It should be noted that the hot button functions change in different modes of operation. See Section 3.4.4 for
more information.
•
The directional buttons are used to:
1.
move the position of the measurement cursors,
2.
adjust the level, span, brightness and contrast ,
3.
navigate around the menus.
See Section 3.4.5 for more information about the directional buttons and see Section 3.4.6.1 for definitions
of level and span, and Section 3.4.9.1 for definitions of brightness and contrast.
•
The menu button opens the menus. See Section 3.4.7 for more information.
•
The laser button must be held down to turn the laser on. See Section 3.4.8 for more information.
Figure 10: Buttons
Power Button
Hot Buttons
Menu Button
Directional Buttons
Laser Button
Directional Buttons