IPU 40108
Page 23 of 29
9)
Profiles – This toggles the 2D profile view which is used to display a graphical representation of the
temperature values along the selected vertical and horizontal lines.
Figure 38: 2D Profiles
To the left of the image is a thermal intensity plot which corresponds to the vertical cross section through the
image. Below the image is a similar plot that corresponds to the horizontal cross section. The cross sections
can be moved by dragging them either independently or by dragging the intersection. The short green
intensity plot lines on the thermal intensity plots can be moved to analyse temperatures in the plots. Double-
click an intensity plot line to make the corresponding cross section line-up with it.
10)
Options – This toggles the display of the options window. The options window has four tabs across
the top and it can be embedded in the application window or in a free-floating window, depending on whether
or not “Dock Options” is ticked in the “Tools” menu. Click the tab labels to select each tab.
Figure 39: Options Tab Labels
The Display tab is shown below:
Thermal
Intensity Plots
Cross Sections
Intensity Plot Lines
