IPU 40060 Issue 9
Page 23 of 27
7) Pull the cable through the handle so that the
8) Pull the spring loaded clip up, so that the
‘Pocket PC’ can sit on the back of the handle.
‘
Pocket PC’ can be fitted into position.
9) NOTE: The clip can be rotated to
10) Example: with the clip around the wrong
accommodate different Pocket PC models.
way it may cover the Pocket PC power button
.
11) Example: with the clip around the correct
12a) Note the locators near the bottom of
way the Pocket PC power button is not covered. pocket PC at both ends.
12b) Slide the cable cover put aside earlier in
12c) The bottom end of the cable cover is then
between the locators.
slotted into the handle.
