Iris Ohyama PC-MA3 Page 38 User Manual Download

Page: 38 / 42

PC-MA3

Malfunction

error display

E04

E05

E06

Malfunction

error display

E02

Malfunction

error display

E03

●

An internal abnormality is

detected

●

The lid has not been set in

the proper position

●

The temperature sensor

has overheated

●

Stop using, unplug the power plug

from the socket, please consult the

shop where you purchase.

●

Set the lid in the proper position (see

page 13) and try again.

●

The error display can be turned off

by pressing the

Keep Warm/Cancel

button.

●

Press the

Keep Warm/Cancel

button, open the lid, and cool down

for at least 30 minutes

If that still does not solve the problem,

please consult the shop where you

purchase.

Malfunction

error display

E07

●

The sealing gasket is not

installed.

The pressure release knob

is not correctly set (VENT,

SEAL)

●

Press the

Keep Warm/Cancel

button

to turn off error.

Press the

Keep Warm/Cancel

button

to open the lid and cool it for 30

minutes or longer.

If the problem still persists, please

consult the shop where you purchase.

State

Causes

Measures

➡

Even after

cooking has

finished, it

does not

switch over to

keep warm

●

Selected mode does not

have the

Keep Warm

function

●

After cooking has finished, it will

switch over to keep warm for only all

the

Automatic

menu.

➡

There is a

sound like

that of water

splashing

●

There may be drops of

water on the outside of the

inner pot or on the inside

of the main unit

●

Wipe up any drops of water before

setting up the inner pot in place.

➡

Troubleshooting

continued

Time Setting

cannot be set

●

Timer function is not

available for the selected

menu.

●

The timer can only be used for all the

Automatic

menu.

➡

Summary of Contents for PC-MA3











































Search results

Summary of Contents for PC-MA3

Reviews:

Related manuals for PC-MA3

Brands by name

Popular brands

Iris Ohyama PC-MA3, User Manual

Search results

Summary of Contents for PC-MA3

Reviews:

Related manuals for PC-MA3

Brands by name

Popular brands