background image

K

PC-MA3

15

EN

Continued→

  

Press the Automatic menu button 

and select Rice

•  The 

Rice

 indicator lamp will light up, and 

the remaining cooking time will blink.

•  The 

Start

 indicator lamp and the 

Preset

 

indicator lamp will blink.

Blink

  

Press the Start button

•  The 

Start

 indicator lamp will light up, and 

cooking will start.

•  The remaining cooking time will be 

displayed.

Indicator on

※ 

Cooking time is a reference only and can 

vary depending on the volume of ingredients 

and its use environment. 

※ 

During cooking, the displayed cooking time 

may be shortened suddenly or countdown 

may stop for a few minutes, but they are not 

abnormal.

Install the inner pot in place and 

close the lid

•  Wipe up any grains of rice or water 

droplets on the outside of the inner pot 

and the inside of the main unit.

•  Make sure that the rice is even and level.

• 

Line up the ▼ mark on the lid with the 

mark on the main unit 

( )

, hold the lid 

handle and rotate clockwise until it stops 

(

until it is in the 

( )

 position

)

.

•  Make sure that the weight is set up firmly 

in the anti-block.

•  Take the pressure release knob on the 

weight and put it on sealed side 

( )

.

Align on 

sealing 

mark

VENT

SEAL

Align with this 

mark and turn

Connect the power cord

Insert the power supply into the socket on 

the right side of the main unit, and insert the 

power plug securely into a socket nearby.

Summary of Contents for PC-MA3











































Reviews: