Network Config (continued...)
UPnP Config:
Configure UPnP protocol settings.
P2P Config:
C o n fi g u r e s P e e r t o P e e r
connections. Also displays QR
Codes to download a generic F.O.C
IP camera viewer App and the
uniques configuration to enable the
camera to connect to a third party
VPN host for remote viewing, which
can be accessed from the App (see
below).
Code Config
The code config window is where camera resolution,
refresh rate, bit rate control etc are set. Both streams can
be configured independently.
Alarm Config
The IRIS460 supports motion recording and scheduled
recording.
For Motion Detection, you define the areas of the screen
you wish to become ‘alarmed’ by drawing boxes as
desired in the Alarm/Motion window. Subsequently, when
motion is detected within these boxes, the camera enters
alarm state and begins recording to the path defined in
LOCAL SETTINGS.
Use mouse (or touch-screen) to ‘draw’ motion alarm
zones.
Scheduled Recording lets you define at which time and on
which days the camera records, as shown below.
Iris Innovations
IRIS460 User Guide v2.01 May 2018
14
