IRIS DISPLAY PRISMA, Instruction Manual

Page: 8 / 50

8
MNL236
ENGLISH
1.7 USAGE
This Panel PC is a computer complete with a monitor on which all the necessary programs can be
installed for a correct operation of the machine or of other devices connected to the machine.
The product can be placed on a surface (using specifi c optional supports) or by wall/ceiling mount
(using specifi c optional brackets) and connected to an Ethernet network if needed.
For further information on the various connections see chapter
For information on connections, see the following chapter: CONNECTIONS INFORMATION
.
1.7.1 TOUCH SCREEN OPERATION
The touch screen used for the products mentioned in this manual are of resistive technology and are
designed to operate for at least 10 million of pressures. Designed for use on the LCD screen, the
glass plates of appropriate size have a coating of uniform resistivity. With a touch, the conductive
coating provides electrical contact with the conductive coating of glass. The diff erence in
potential created at the point of contact provides the exact position of the point touched. The electronic
command and control scans and sends this information to the computer for processing. For each
touchscreen is available a driver for device control that have to be loaded and calibrated with
the operating system provided with the motherboard. If there is no operating system preinstalled,
drivers will be provided in the packaging.