70375-EN Rev B
5
Component
Description
Illumination prism
Projects white light from slit lamp without interference with laser delivery.
Micromanipulator handle
Allows independent beam steering capabilities.
Eye Safety Filter
Protects against laser wavelength reflected back to oculars.
Finger rest
For use when using the micromanipulator.
Spacer
As necessary, depending on TxCell SSLA model.
Mounting bracket
As necessary, depending on TxCell SSLA model.
Slit lamp table
Diagnostic system to which TxCell SSLA attaches (workstation component).
Fiber-optic cable
Transmits laser light.
SSLA Control cable
Communicates spot size, filter information, and scanning information to the control box.
Control box
Houses the power supply, scanner controller, and electrical components
Control box cable
Connects the control box to the laser console
Set Up TxCell Control Box
1.
Place the laser console on top of the Control Box (preferred, or as space permits). If brought in from the
cold, wait for the temperature of the system to warm up to room temperature.
2.
Connect Control Box to laser console using the provided Control Box Cable.
3.
Connect Control Box to electrical outlet.
Control Box Cable
