70375-EN Rev B
23
Display
Error Type
Description
E09022
Laser console version too old
No Error Displayed
on Screen
Laser console version too old to support the scanner.
Three (3) audible beeps generated by the scanner indicate
the error.
E09023
Laser console not found
No Error Displayed
on Screen
Laser console is not found (i.e., not attached to the
scanner). Four (4) audible beeps generated by the scanner
indicate the error.
E09025
Fiber Check: Fail. Call
Service
Call Service
The fiber optic integrity may have been compromised.
E09500
Scanner controller not found
Call Service
Scanner hardware not found. Can be caused by a
disconnected internal cable or internal hardware failure.
E09501
Mirror motion error
Warning
Scanner mirrors moved during treatment, and the current
scan pattern has terminated prematurely. User is allowed
to start a new treatment.
E09502
Laser did not fire
Warning
IQ laser did not fire when requested, and the current scan
pattern has terminated prematurely. User is allowed to start
a new treatment.
E09503
Scanner needs calibration
Call Service
Scanner is not calibrated or calibration was corrupted.
E09505
Scanner static self-test error
Call Service
Scanner power-on self-test (POST) of no movement failed
(i.e., circuitry reported that the scanner was moving when it
was not).
E09506
Scanner X-axis POST error:
AT H
Call Service
Scanner POST of X-axis movement failed. At Position
signal is always high.
E09508
Scanner Y-axis POST error:
AT H
Call Service
Scanner POST of Y-axis movement failed. At Position
signal is always high.
E09510
Scanner unexpectedly
stopped
Warning
Scanner unexpectedly stopped while scanning a pattern.
E09512
Scanner busy POST error
Warning
Scanner reported busy when it should have been idle.
E09513
Scanner idle POST error
Warning
Scanner reported idle when it should have been busy.
E09514
Scanner driver fault
Warning
X or Y axis Cambridge driver fault signal is asserted.
