Model 2100,2080,2000 Ver.14.0
29
12. TROUBLESHOOTING
Heating System
Symptom
Problem
Corrective action
Does not heat
1.
Temperature setting is too low.
2.
Dirty filter
3.
Air Lock
1.
Turn up the thermostat
2.
Clean filter
3.
Prime pump
Too hot
1.
Temperature setting too high
2.
High limit tripped
3.
Too much filtration
1.
Turn down the thermostat
2.
Call for service
3.
Reduce the number of filter
cycles and/or the filter cycle
duration
Hot Tub
Temperature
erratic water
1.
level
1.
Fill with water to 3‖ (7cm)
to 4‖ (10cm) above top of
the filter
Display reads
Symptom
Problem
Corrective action
OVERHEAT
1.
Too much filtration
2.
Temperature setting too high
1.
Reduce the number of filter
cycles and/or the filter cycle
duration
2.
Turn down the thermostat
Will not turn on
in any mode
1.
No power
1.
Check
circuit
breaker
and/or R.C.D.
Turns on by itself
1.
Normal automatic daily power
Filtration or anti-Freeze cycle
1.
No action required
Light is out
1.
Burned out bulb
1.
Replace bulb
Pump shuts down
Symptom
Problem
Corrective action
Unexpectedly
while in use
1.
Automatic timer has shut pump
off
2.
Motor over- heated and
automatic protective device has
shut down pump(s)
1.
Push JETS Button again to
start another cycle
2.
If pump(s) will not restart
when
JETS
Button
is
pushed, call for service
3.
If problem persists, call for
service
