7.8
Data Logging
The Data Logging window allows to activate data
logging to two different physical locations:
• <Log to Computer> will log the measurement data of
the ParticleScan automatically to the Log to
Computer window. The maximum number of
measurements logged to computer is limited only by
the hard disk space on the computer.
• <Log to ParticleScan memory> will log the measure-
ment data to the internal memory of the ParticleScan.
The internal memory of the ParticleScan can log
14,336 measurements.
7.8.2
Data Logging to Computer
To log measurement data to a computer, select <Log
to computer>. This automatically opens the Log to
Computer window.
If a measurement is in progress, measurement data is
added with every measurement update.
To delete the logged data, click on the <Delete Data>
button. When the data is deleted, the Log to Computer
window will automatically be cleared.
To print logged data, click on the <Print> button. (see
Chapter 7.8.6 )
To save logged data to a CSV file, click on the <Save to
File> button. (see Chapter 7.8.7)
23
7.8.1
Checklist Before Data Logging
Before data logging either to a computer or to the ParticleScan memory is started, the following should be checked:
1.
Is the correct date & time set? All measurement data will be date and time stamped based on the information in
the Time & Date window which is accessible from the Tools tab.
2.
Does the Location Number need to be changed? The location number is not only a useful tool to identify measure-
ments taken in different locations, but also under different conditions.
3.
Is there any redundant data that should be erased from the ParticleScan memory or the Log to Computer window?
Chapter 7 – Computer Connectivity
Summary of Contents for ParticleScan CR
Page 30: ...30 Notes...
Page 31: ...080312_IQ_MA_PSPPSCR_US...
