IQAir ParticleScan CR, User Manual

Page: 16 / 31

7.2.3 Via USB
System requirements: Windows XP/Vista
Software requirements: ParticleScan USB Connection Software and
ParticleScan USB drivers (supplied on CD)
Hardware: Computer with USB port, USB cable (supplied)
The USB connection of the ParticleScan is only supported for Windows
XP/Vista computers. For USB connectivity, the installation of ParticleScan
USB drivers and of the ParticleScan USB Connectivity Software is necessary.
These are included on the ParticleScan CD supplied with the ParticleScan.
Important: The IP Menu needs to be set to [IP OFF] for the USB
connection to work (see Chapter 5.13).
7.2.4 USB Driver Installation
To allow data communication via a USB connection to a Windows com-
puter, two drivers need to be installed. This installation process is easy
and automatic.
16
Chapter 7 – Computer Connectivity
Connect the ParticleScan and the computer with
the supplied USB cable.
The New Hardware Wizard automatically appears.
Select <No, not this time> and click <Next>.
Insert the ParticleScan CD and leave the selec-
tion on <Install the software automatically>.
If the installation doesn’t start, click <Next>.
Click <Finish>. The first driver is now installed. The New Hardware Wizard automatically appears
to install the second driver. Select <No, not this
time> and click <Next>.
2. 3.
4. 5.
1.