iQ360XT
Operator’s Manual
888-274-7744
www.iqpowertools.com
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS.
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW.
FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT IQ POWER TOOLS AT 1-(888)274-7744.
TROUBLE! SAW WILL NOT START
WHAT’S WRONG?
WHAT TO DO
1. Saw not plugged in
1. Plug in saw
2. Fuse blown or circuit breaker tripped 2. Push switch to off and replace fuse or reset
circuit breaker.
3. Cord damaged
3. Have cord replaced by authorized service center.
4. Brushes worn out 4. Have brushes replaced by authorized service center.
TROUBLE! SAW MAKES UNSATISFACTORY CUTS
WHAT’S WRONG?
WHAT TO DO
1. Dull cutting blade
1. Replace cutting blade
2. Blade not cutting
2. Use dressing stone
3. Build up on cutting wheel 3. Use dressing stone to remove build up
4. Incorrect cutting wheel for work being done
4. Change the cutting wheel
TROUBLE! CUTTING WHEEL DOES NOT COME UP TO SPEED
WHAT’S WRONG?
WHAT TO DO
1. Extension cord too small of a wire gauge or too long 1. Replace with adequate size cord
2. Arbor loose
2. Tighten arbor
3. Low house voltage 3. Contact your electric company
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT’S WRONG?
WHAT TO DO
1. Saw not mounted securely to stand 1. Reposition stand.
2. Stand or bench on uneven floor
2. Reposition on flat level surface
3. Damaged saw cutting wheel 3. Replace cutting wheel.
TROUBLE! LOSS OF VACUUM SUCTION
WHAT’S WRONG?
WHAT TO DO
1. Vacuum motor not running
1. Check vacuum and motor plug
2. Filter plugged
2. Spin filter cleaning knob
3. Dust tray in unlocked position
3. Lock dust tray
4. Dust tray over filled with dust
4. Empty dust tray and remove dust build up around filter
TROUBLESHOOTING GUIDE
8.1
