iQ360XT
Operator’s Manual
888-274-7744
www.iqpowertools.com
The carbon brushes must be removed and checked
regularly. Weekly if the machine is used daily. The two
carbon brushes (A) and (B) are located on the front and
back side of the motor.
Untighten carbon brush retainer cap with
standard screwdriver.
Remove carbon brush retainer cap.
Remove carbon brush.
INSPECTING AND REPLACING THE CARBON BRUSHES
Inspect carbon brush and replaced it necessary
Install carbon brush making sure to align tabs into slots.
Tighten carbon brush retainer cap to secure.
6.2
WARNING!
MAKE SURE CUTTING BLADE
COMES TO A COMPLETE STOP
BEFORE PERFORMING ANY MAINTENANCE OR TRANSPORTING.
