IQCCTV
IQ960DVR User Manual
40
5.3.6.2 Alarm Set
Click the [Main Menu
à
Alarm
à
Alarm] to enter into the Alarm menu (Below). This menu allows
the user to set alarms based on different statuses.
Ø
No:
Select one desired channel
Ø
I/O Status:
Choose between the following three options – NO (Normal Open), NC (Normal
Close) and OFF. Set to “Normal Open”, the I/O status Alarm will be activated while sensor is
ON. Set to “Normal Close” and the I/O status alarm will be activated while sensor is OFF. Set
to “OFF” and the I/O status alarm will not be triggered.
Ø
Alarm out:
Connect an external alarm sensor.
Ø
Latch time:
Set how long the buzzer will sound when external sensor alarm is detected (10s,
20s, 40s, 60s);
Ø
Show Message:
Change the message that shows on the screen when sensor alarm is
detected.
Ø
Buzzer time:
Set how long the buzzer will sound when the sensor alarm is detected (Off,
10s, 20s, 40s, 60s);
Ø
Send Email
：
Choose whether to send images to a specified email when the alarm is
triggered.
Ø
Full screen Alarm:
The function is defaulted to “On". When motion is detected, the
corresponding channel will be switched to the full screen mode.
Ø
Record Channel:
The record channel will be activated when a moving object is detected.
Ø
Post Recording:
Set how long the alarm record will last after the alarm ends (30s, 1minutes
，
2minutes
，
5minutes).
Ø
Copy:
Copy current channel parameters to any other channel or all channels.
