IQCCTV
IQ960DVR User Manual
37
Click the [DST Setup] button to enter into the below interface shown as Picture 5-40, to configure
the DST status and mode.
Click the [NTP setup] to enter into the interface shown as Picture 5-41, to enable/disable the
NTP function.
Please Note:
The above [NTP function] change will only be available when the system is
connected to the Internet. When the NTP function is set to “Enable”, the system will calibrate the
time at every 00:07:50 and every start-up.
5.3.5.4 Users
Click the [Main Menu
à
System
à
users] option and then enter into the interface as shown in
picture 5-42.
The model supports up to seven users with one Admin and six users. Click the [Edit] button to
enter into the [User Edit] interface as shown picture 5-43.
Picture 5-42
Picture 5-43
Picture 5-40
Picture 5-41
