PDFMAILER.COM Print and send PDF files as Emails with any application, ad-sponsored and free of charge www.pdfmailer.com
I P W i r e l e s s B r o a d b a n d M o d e m U s e r G u i d e
1 7
3. When the self-test is complete, the power on LED will illuminate. If this
indicator flashs on and off, there may be a problem with the IPWireless
Broadband Modem. Call your Service Provider for Technical Support. Note:
The display will dim after two minutes to conserve battery life -- this is
normal. A momentary press of the power button will restore the brightness of
the display.
4. The IPWireless Broadband Modem will ‘search’ for a base station, in a
manner similar to a cellular phone. Whilst the modem is searching, the two
LEDs marked Tx and Rx on the right hand of the will illuminate alternatively.
5. Observe the four signal indicators (LEDs) on the left hand side of the
IPWireless Broadband Modem display to help you determine when the
IPWireless Broadband Modem has located a radio signal. Adjust the position
of the IPWireless Broadband Modem until the center ring is illuminated. This
is similar to moving an FM radio to receive the best sound quality. When the
bottom yellow LED is illuminated, you have the minimum signal strength
required to transmit and receive data. Each subsequent LED indicates
increasing signal strength. When all four LEDs are illuminated, you can
transfer data at the maximum speed of the IPWireless Broadband Modem,
or at the service level you selected. See Figure 5, below.
Figure 5
3. Continue to adjust the position of the IPWireless Broadband Modem to
achieve the strongest radio signal possible from your location. Tip: Placing
the IPWireless Broadband Modem near a window can boost the signal
strength.
Signal Strength
