Product Description of BRT-606
Page 3 of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
Fig. 4 shows the remote control set. Each of the buttons can be used as an on/off button. Although
there are 6 buttons on the remote, only two buttons are needed to control one BRT-606 wall mount
unit. The remote set can be set to control up to three BRT-606 wall mount units. Please refer to
“
BRT-606 Timer Switch Setup” for details.
Specification Parameters:
Input Voltage
220
～
240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH
，
-20
℃～
55
℃
Wattage
1000W/Loads
Load type
All Types
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Wall Mount
Unit Dimension
86mm x 86mm x 43mm
Wall mount
Unit Weight
112g
Remote Set
Dimension
102mm x 43mm x 13mm
Remote Set
Weight
33g
Wiring Diagram and Installation Guide:
The wall mount unit of BRT-606 timer switch requires both hot wire and neutral wire for
installation:
Hot wire (ACL):
Coming from the power line with 220V;
Neutral wire (ACN):
Usually coming with the hot wire;
Load wires:
Going to the load.
Fig. 5
Wiring Diagram of Wall Mount Unit
Warning:
Please make sure power is turned off before starting installation!
Fig. 5 shows the wiring diagram and Fig. 6 shows the step-by-step installation instructions. There
are three easy steps:
