Ipswitch Gateway 2017 Plus, User Manual

Page: 30 / 37

26 Ipswitch Gateway User's Guide
2 Show Details
:
§
IP address
. The IP address or hostname of the MOVEit Transfer server.
§
Port
: The port of the MOVEit Transfer server.
§
Expected Host Name
(optional): Host name of the MOVEit Transfer Endpoint. If no host
name was given during install, will show N/A.
§
Host Name Verification Policy
:
§
Default
: The server you connect to must have a cert that matches one of the hostnames
listed. A wildcard can occur in the common name (CN), and in any of the subject-alts.
The one divergence from IE6 is that we only check the first CN.
§
Allow All
: Allows you to connect to any server without performing a hostname check. For
testing purposes only - do not use in a production environment.
§
Virtual Path
: The MOVEit Transfer server's virtual path.
Delete Endpoint
. You must be signed in to the Ipswitch Gateway computer as a MOVEit Transfer sysadmin
or orgadmin to delete the Endpoint.
You may need to delete the Endpoint if the MOVEit Transfer server is down and you want that server's
proxies to point to a running Endpoint. If you delete the Endpoint, you must configure and verify a new
Endpoint. The Ipswitch Gateway Trust Store must contain the x509 certificate for the Endpoint to perform
an SSL handshake. See
Keys and Certs (on page 30).
Warning
: Deleting the Endpoint will delete all of the Endpoint's proxies too, even if they are running. You
cannot undo the deletion of the Endpoint. If you delete the Endpoint, you'll be prompted to configure and
verify an Endpoint after sign in.
3
Transfer Rate
: The average number of bytes transfered per second by all of the Endpoint's proxies (upload
and download) for 1-minute, 5-minute and 15-minute intervals. Numbers are moving averages for each
time period.
Click
Refresh
to update the numbers with current data. Each individual proxy's transfer rate will update
too.
4 Proxy protocol type
: An icon shows the proxy's protocol: FTP, HTTP or SSH/SFTP.
5
Name
: A user-defined name for the proxy. To edit the proxy name click under
Actions
.
For FTP proxies, you'll see:
FTP proxy allows only secure traffic
FTP proxy allows insecure traffic
To edit this option, click to the right of the proxy and stop the proxy if necessary, then click Edit
from the same drop-down list. Check or uncheck Allow Insecure FTP.
If the proxy is running, click the proxy name to show or hide
transfer metrics
for that proxy:
§
Transfer Rate
: The average number of bytes transfered per second by the proxy, showing
moving averages for 1-minute, 5-minute and 15-minute intervals.
§
Commands
(FTP and SFTP only): The average number of commands processed by the
proxy, showing moving averages for 1-minute, 5-minute and 15-minute intervals.
§
Running
: Shows how long the proxy has been running.
§
Sessions
(FTP and SSH/SFTP only): The number of active sessions.
§
Requests
(HTTP only): The number of requests