Ipswitch Gateway 2017 Plus, User Manual

Page: 15 / 37

Install 11
Step 2: Install Client-Side SSTP Tunnel on a MOVEit Transfer Server
1
Sign in to the MOVEit Transfer server with administrator credentials.
2 Go to the Customer Portal ( https://ipswitchft.secure.force.com/cp/CPHome ) and download the
installer for Ipswitch Gateway for MOVEit Transfer.
3
Open the Ipswitch Gateway installer and click
Run
to run the install wizard.
4
Step 2: Install a client side SSTP Tunnel on your existing MOVEit Transfer server
is preselected.
Click
Next
.
5
System Check
: The installer verifies that you have
Administrator Privileges
.
Note
: If you chose to use a self-signed certificate during the Ipswitch Gateway Tunnel server
installation, you must import that certificate from the server computer into this computer's certificate
store before continuing with the installation.
Click
Next
.
6
Options: Connect SSTP tunnel to Gateway Server
. Enter the Gateway Server Address or hostname to
establish a connection.
Important
: What you enter here must be identical to what you entered for IP address or hostname
in Step 1 (on page 8): Options: Gateway Configuration Interface > System-generated self-signed
certificate > Certificate Name.
Click
Next
.
7
If the SSTP certificate does not exist on the client-side machine, you must choose to either trust and
import the SSTP certificate from the Ipswitch Gateway Tunnel, or not trust and not import it:
§
I trust this certificate. Import this certificate into the local trusted certificate store
: Automatically
imports and trusts the SSTP certificate.
§
I do not trust this certificate. Do not import this certificate
: Does not import the SSTP certificate.
You must import the certificate manually. (This option is not often used. Situations where you
might select this option include importing the certificate manually to avoid the software from
importing a certificate from a man-in-the middle attack, or changing certificates after installation.)
8
Options: SSTP Tunnel Credentials
: Enter the SSTP Tunnel Credentials that you wrote down at the end
of Step 1 (on page 8). An account will be created that will run the SSTP tunnel.
Note
: If the Gateway Server computer requires a domain name during connection,
enter Domainname \ GatewayVPNUser instead of GatewayVPNUser
Click
Next
.
9
Options: Scheduled Task Context Account
: Enter the credentials for an existing local Windows
account. This account will be used to initiate and monitor the SSTP tunnel. This user will be used as a
context user by the scheduled task that will start and monitor the Gateway Tunnel Connection.
10
Ready to Install
: Verify the installation setup, and then click
Install
.
After a few moments, installation is complete.
11
Click
Finish
.
12
Next, you may need to manually start the VPN tunnel connection. On the MOVEit Transfer server,
open
Network Connections
.
13
Right-click
Ipswitch Gateway Tunnel
and select
Properties
.
14
Select the
Security
tab.