IPSO HC100, Instruction Manual

Page: 21 / 35

21
4
Remarks:
Freely programmable stop-function
Before starting a program it is possible to preprogram a time stop in every
program segment . This function permits special additional functions like ad-
ding bleach or extra detergent to the wash bath.
Programming:
After selecting the program, press the ECO-button (E) and keep it depres-
sed .
Now push the START-button (S) simultaneously and release same . Only now
release the ECO-button (E) .
The left display now shows “ StO ” (Stop) and the right display shows
the program number. The fi rst program sequence LED is switched on.
Confi rm by pressing the START-button (S) if a time stop is required in this
phase of the program. If no time stop is needed, press the ECO-button (E) to
move on to the next segment of the program. Run through the entire program
in this way. If needed, return to previous segments by pressing the SELECT-
button (P).
Errors can be corrected by returning to the erroneously programmed time stop
in the segment and correcting by pressing the START-button (S).
After the fi nal program segment all programmed time stops will be displayed
and the left display will show “
End ”. Confi rm this program by pressing the
START-button (S) again. Now start the program.
Operation:
When a stop is reached during the run of the program, the
time
will be stopped
. The wash bath will
be filled to the appropriate
level and temperature
and the
programmed wash action is executed.
The left display will alternately show
temperature and “StO”
, while the cen-
tral display is showing “
F1
”. Now, if so desired, additional detergents can be
added.
When this has been done, press the START-button (S) to continue the run of
the program. To remove any possible remains of corrosive products in the tub,
the machine will rinse an additional
2 seconds .
Programmable automatic start
By using this function a program can be started up to 99 hours later.
Programming:
After selecting the program, press the SELECT-button (P) again and keep it
depressed.
Now push the START-button (S) simultaneously and release same . Only now
release the SELECT-button (P).
The left display now shows “
DEL ” (Delay). The central display shows “ 10 ”
(minutes). Every push on the SELECT-button (P) will add 10 minutes to the
delayed start time. Hours and minutes are separated by a decimal point: 1.5
stands for 1 hour and 50 minutes. After 10 , the counting is done by hours .
By pressing the ECO-button (E), the delay time can be counted down.
Operation:
After having set the desired delay time, the count-down can be started by pres-
sing the START-button (S). During the count-down
the displays blink and the
remaining time is counted down. In the last hour the displays blink faster. When
the delay time has elapsed, the program is started automatically.