IP0051
User Guide ver. 1.1
5 SIP + 1 IAX
page 19 of 20
© IPshop ApS 2009
C:\I_drev_tmp\IP0051\IP0051_user_guide.doc Ver. 1.1
8.4 Forward
When there comes the incoming call, press Drivert when the phone rings, then enter the number
you want to call and press Send. This incoming call will be forwarded automatically. Therefore, if
you don’t answer a call, use this function to forward the call without caller’s awareness.
8.5 Blind transfer
When you get a call from A, but A wants to talk with B. Then you can press
Transfer
button,
input B’s number and end with # button to transfer the call and make A puts through with B.
Note:
It can be applied when there comes a new call when you are in the course of call already. In
this situation, press
Switch (softkey1)
to switch between the two calls or press
Transfer
to
transfer the call.
8.6 Attend Transfer
When you get a call from A, and A wants to talk with B. But B might not in the office or busy
with something else, you can press
Conference
button to call B to check if B is available. If yes,
then you can press
Transfer
to forward the call to make A put through with B; If not, just press
Close to end your call with B and the call will be back to A’s talking status.
8.7 Three Way Call
When you are talking with A and want to get C in the call also, you can press CONFERENCE
button to hold the call with A temporarily and then call C, press CONFERENCE again to make 3-
way conference call.
8.8 SMS
Press SMS button(softkey1) in stand-by mode,
SMS
►
Add
►
input the message text
►
Send
►
input the number
►
Send
(LINEx
）
, then the short message will be sent to the inserted number
via SIP1. If you press LINEx to send the message, then the message will be sent via your selected
SIP LINE.
8.9 Customized Ringtones
Download your favourite MP3 music, and use the music format converter tool to change the music
into audio format which can be identified by the phone. One important thing is that the name
should be in 1.au, 2. au and should set USER1, USER2’s ringtone correspondingly. Then upgrade
the ringtone via WEB and config on SIP page’s ring type as user1, user2.
