IP0051
User Guide ver. 1.1
5 SIP + 1 IAX
page 16 of 20
© IPshop ApS 2009
C:\I_drev_tmp\IP0051\IP0051_user_guide.doc Ver. 1.1
7.4 Function Key
IP0051 phone’s Function key supports LINE, Memory Key, Key Event as well as 4 DTMF
models.
LINE: If you config the function key as SIP LINE via web, then you can select which SIP LINE to
call, only successfully registered SIP Line can be selected and available.
●
Memory Key: this mode can support Presence, BLF, Push to talk, MWI and other functions.
●
Key Event: the user can set shortcut keys as their preferences;
●
DTMF: set the number sent by DTMF;
Specific settings are as follows:
7.4.1 LINE
7.4.2 Memory Key
BLF, presence, MWI and speed dial functions can be achieved by memory key.
●
/b Busy Lamp Field: based on the asterisk platform, can be used to check the phone status(idle,
ring, busy), so that switchboard and phone operator to know other phones’ status and decide to
proceed the call or not.
You can config BLF function as the picture shows above: 300 is used to check the other number;
@1 means SIP1 is used or you can config @2(SIP2). Other lines followed by analogy; If not, that
is 300/b, then take the default SIP1 line; /b means to enable BLF function. At this moment, the
device will check others’ status every 60s. Idle state, LED out; ring state, LED flash red; in call or
unavailable state, busy state, LED long red light.
●
/m MWI
（
message waiting indication
）
: correspondingly, the key number is the
number of voicemails.
You can config MWI function as the picture shows above:
8008 is mailbox number;
@1
means SIP1 is used or you can config @2(SIP2). Other lines followed by analogy; If not, that is
8008
/m, then take the default SIP1 line; /m means to enable MWI function.
If there is a new voicemail, led flashing will prompt a new message, after finishing listening to the
message, server will send the current message to the phone. Receiving new MWI, led adjusts to
eliminate, said no new voicemail notification.
