IP0051
User Guide ver. 1.1
5 SIP + 1 IAX
page 17 of 20
© IPshop ApS 2009
C:\I_drev_tmp\IP0051\IP0051_user_guide.doc Ver. 1.1
●
/p Presence: that is, the phone can check the corresponding phone’s current state.
You can config Presence function as the picture shows above: 618 is the number you want to
check; @2 means SIP2 is used or you can config @3(SIP3). Other lines followed by analogy; If
not, that is 618/p, then take the default SIP1 line; /p means to enable Presence function. Press this
key, to check the number’s phone status(on, off, fail etc) on the screen.
Online and idle state, LED display long green light; Offline state, LED display long red light;
ringing or busy state, LED flash green light. If you are using special IP PBX, please select
Presence Mode--“special” on SIP-SIP webpage. If you are using Asterisk server, please select
“standard”.
You need to restart the phone after revising the presence mode.
●
/f speed dial: In standby mode, press the key then the phone calls will be put through directly to
the speed-dial number.
●
/i PUSH TO TALK: In standby mode, keep pressing this key to make outgoing call and the call
will be answered automatically; let go the key to hang up the call.
You can config push to talk function as the picture shows above: 626 is the other’s number; /i
means push to talk function is enable.
In standby mode and press this key to call 626, the call will be answered automatically.
Note: Automatic answering function need supports from callee’s phone features.
7.4.3 Key Event
●
F_PBOOK: shortcut key to config phonebook;
●
F_REDIAL: shortcut key to redial;
●
F_DND: shortcut key for no disturb;
●
F_MWI: MWI shortcut key to check the quantity of old and new message;
●
F_CFWD: call forward shortcut key;
●
F_CALLERS: shortcut key for call record;
7.4.4 DTMF
After configuration, the phone will send out the number by DTMF mode.
