42
www.acti.com
www.iprosecu.com
“Proceed anyway” and you can continue going to the camera page.
b. SNMP (Simple Network Management Protocol)
SNMP provides a simple framework for administering networked hardware. To
manage the IP camera, you have to prepare a MIB browser or similar tools first.
SNMPv1, SNMPv2c, and SNMPv3 can be enabled simultaneously.
The following examples are based on MG-SOFT MIB Browser. Depending on
your MIS Browser, you may see different interface and options. Please refer to
the user manual of your MIB Browser.
(i) SNMPv1 and SNMPv2:
The term "Community name" in SNMPv1 and SNMPv2c can be roughly
regarded as key. The person who has the community name has the authority to
read or edit the information of IP camera via SNMP.
Tick the box to enable SNMPv1 or SNMPv2c protocol, and specify the
community name for write(read and write) and read(read-only). The user who
use read community name to access the IP camera cannot modify any data of
this camera. The community name can be any English characters and numbers,
and must be shorter than 31 bits.
Example:
