54
www.acti.com
www.iprosecu.com
5. Wireless Settings: Support 802.11 b/g/n
To set up the IP camera via wireless network, use ethernet cable to connect the
camera first. After you finish the wireless setting and save it, remove the ethernet
cable.
Note: The IP address is the same under both wireless and wired network. If the
Ethernet cable is plugged in the camera, the IP camera will use it to link to the
Internet instead of wireless router.
a. Status of Wireless Networks
The camera scans and shows the SSID, Mode, Security, and Signal Strength of
wireless network here.