45
www.acti.com
www.iprosecu.com
(iii) SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send messages to
manager instead of waiting passively for polling from the manager. Specify the
trap event. When those events happen, the camera will send the ring message
to the Trap Address, which is usually the manager's IP address. Trap
Community means the community that can receive the trap message.
Note: Trap Address must be under the same LAN with IP camera.
Cold Start: The camera starts up or reboots.
Setting changed: The SNMP setting is changed.
Network Disconnected: The network connection was broken down. (The
camera will send trap messages after the network being connected again)
V3 Authentication Failed: A SNMPv3 user account tries to get
authentication but failed. (Due to incorrect password or community)
SD Insert / Remove: A Micro SD card is inserted or removed.
Example: