iProSecu iDC-7ACD User Manual Download Page 77

Page: 77 / 92

www.acti.com

www.iprosecu.com

b. SD Management

Choose “The 1st day” means the recoding file will be keep one day. Example: It

is five o’clock now. Choose “The 1st day”. The files will be kept from five o’clock

yesterday to five o’clock today.

The oldest file will be deleted if the SD card is full.

Note

：

The use of the SD card will affect the operation of the IP Camera slightly,

such as affecting the frame rate of the video.

c. Copy to PC

You can insert the SD card to PC and read the files directly, or use FlashGet

instead to download the files from IP camera. (In this way you do not need to pull

out SD card from the camera.)

To use FlashGet for downloading the image and video data from the SD card,

please follow the steps:

(i) Enter the data list and right-click "Files link daily", select "save target as..." to

save the link list to PC.

Summary of Contents for iDC-7ACD





























































































Search results

Summary of Contents for iDC-7ACD

Reviews:

Related manuals for iDC-7ACD

Brands by name

Popular brands

iProSecu iDC-7ACD, User Manual

Search results

Summary of Contents for iDC-7ACD

Reviews:

Related manuals for iDC-7ACD

Brands by name

Popular brands