56
www.acti.com
www.iprosecu.com
Select this option to send the media files via a network neighborhood when an
event is triggered. Click “Apply” to save the setting, then use “Test” button to test
the server connection. A message box will tell you “OK!” if it works, and a test
document will be created in the location.
If the test failed, check the sharing setting of your location folder. The folder
properties must be “shared” and the permissions must be “Full Control” as the
picture.
5. Wireless Settings: Support 802.11 b/g/n
To set up the IP camera via wireless network, use ethernet cable to connect the
camera first. After you finish the wireless setting and save it, remove the ethernet
cable.
Note: The IP address is the same under both wireless and wired network. If the
Ethernet cable is plugged in the camera, the IP camera will use it to link to the
Internet instead of wireless router.
