iPOWER TPD-800A User Manual
19
View the e-mail alarm setting, e.g POP3 server address, SMTP server
address, e-mail sending port, e-mail sender's address and password,
receive address, carbon copy address, interval of alarm
ONINTERVAL
【
ADDRESS
】
View the power on interval of this
【
ADDRESS
】
OUTPUTS
【
ADDRESS
】
View the output name and address information of this
【
ADDRESS
】
TIMING
【
ADDRESS
】
ALL
View time setting and time of power on/off of all output of this
【
ADDRESS
】
NO.
View time setting and time of power on/off of this individual output of
this
【
ADDRESS
】
, "NO" means outlet number, input one outlet
number at a time.
For instance: SHOW USER: view user information and level.
6)
SET
"SET" command line can configure and control the IP, SUBNET, GATEWAY, DNS1, DNS2, HTTP, TELNET, SSH,
SNMP, MAIL, THRESHOLD, TIMIGN, ONNTERVAL of the device.
A. Network configuration
Network configuration include: IP address, Sub-net mask, Gateway, DNS1 and DNS2
Command line input format: SET
【
Network configuration
】
=
For instance: SEG IP=192.168.1.163: configuration network IP address: 192.168.1.163
Note:
the network configuration will be valid after reboot.
B. HTTP
Command line input format: SET HTTP
【
OPTION
】
【
OPTION
】
as detailed in figure 3-6-b
Figure 3-6-b the description table of HTTP OPTION
For instance: SET HTTP ENABLE: enable HTTP function
【
OPTION
】
Description
ENABLE
Set the HTTP enable
DISABLE
Set the HTTP disable
PORT
Set the HTTP port
