iPOWER TPD-800A User Manual
12
b)
E-mail alarm:
♦
Select “Enable e-mail alarm"
♦
POP3 address: receive e-mail server address, e.g. Sina POP3 address: pop.sina.com;
♦
SMTP address: deliver e-mail server address, e.g.Sina SMTP address: smtp.sina.com;
♦
Port: delivery e-mail port (general e-mail port: 25), input the corresponding output port according to e-mail level.
♦
User name: input the receive e-mail address, make sure this e-mail address is accordant with the SMTP address
♦User
Password: fill in the e-mail password of sender, the password is accordant with e-mail of sender.
♦
Authentication type: the way of e-mail login (general e-mail default as: LOGIN), select the login way according to
the level of e-mail
♦
To address: the e-mail address of receiver, the user can fill one or more receiver, but all the receive address must
be separated by ";"
♦
Cc to: fill in one or more CC-email address, each address must be separated by ";"
♦
From address: the same with User name
♦
Repeat interval: interval of email sending
Note:
Please fill in correct DNS on “Network Config” interface.
E-mail alarm function only support non-encrypted e-mail, does not support encrypted e-mail.
8)
Alarm Logs
Automatically record the alarm information and data, offer viewing and leading out function, details as below:
a)
Daily record the alarm and recovering information of current overload, temperature/humidity from exceeding
limitation, problem occurrence and the status information of sensor connection and disconnection;
b)
"Select Device" to select and view the single device daily record information;
c)
Select "First", "Previous" "Next" to view the daily record;
d)
Select "WEB" or "EXCEL" to leading-out the daily record information;
e)
"clear all records" to clear all the record information of single device.
9)
System
a)
View the latest software version, time of update, hardware address( MAC), RAM space, CPU occupancy rate
and total system operation time.
b)
Click "reset system settings" to restore factory settings e.g. Device Configuration, Alarm Setting, Web, Console,
SNMP, User Manage and other configuration of menu; it will be valid after rebooting.
10)
Web
Configure HTTP, user can enable or disable the HTTP port, details as below:
