MIG-160ER
14
8
An arc is created as
soon as the gas
nozzle is touched
Short circuit between electricity
and gas nozzle
Clean the gas nozzle and torch
neck and spray with welding
spray
9
Torch gets too hot
Contact tip too big or loose
Use a contact tip suitable for the
wire size or screw the tip tight
10
Insufficient welding
current
Bad contact
Check ground cable and pliers
or hose package, replace if
necessary
PROPER DISPOSAL
In accordance with the DIRECTIVE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL on waste
electrical and electronic equipment and its implementation in national law, used power tools must be
collected separately and recycled in an environmentally friendly manner.
CAUTION! Do not throw away power tools in the household waste!
The device consists of various materials that must be collected separately, as it can contain
both environmentally harmful substances and valuable raw materials such as aluminium,
which must be disposed of properly. The trash can symbol indicates the need for separate
collection.
You too can help protect the environment and ensure that as many resources as possible are used
again and that the environment is preserved. If you no longer wish to use this device, please take it to
the system provided for this purpose, the local recycling centre, so that it can be disposed of there.
For this purpose, the public waste disposal authorities set up collection points where old devices from
private households in their area can be accepted free of charge. The legal disposal authorities may also
collect the old devices from private households. - Please check your local waste calendar or your city or
local authority for information about the return or collection options for waste equipment in your area.
BATTERIES
Do not dispose of the batteries with household waste. Batteries are pre-installed in the toolbox and
cannot be removed from the tool by the user. The disposal of the battery must only be carried out by a
specialist.
The use of these substances in new devices is severely restricted by the Electrical and Electronic
Equipment Act. In some components, however, it is still necessary to use them today, so that the old
devices often still contain significant amounts of pollutants.
MANUFACTURER WARRANTY
1. MANDATORY WARRANTY
IPO Technik-Handels GmbH grants a warranty to all customers for all welding machines and/or plasma
cutters purchased directly from IPO Technik-Handels GmbH of the IPOTOOLS brand.
All devices are subject to a 2-year statutory warranty from the invoice date under the warranty conditions
below and if it is not due to incorrect or careless handling by the customer.
