CM-IW2000 V2 Instruction Manual
7
Specifications
Power supply:
15V 1A DC, regulated
Dimensions (W x H x D):
11.60” x 9.51” x 2.36”
(294.6mm x 241.6mm x 59.9mm)
Cut-out Dimensions (W x H):
10.75” x 8.65”
(273.1mm x 219.7mm)
11.60in
294.6mm
9.51in
241.6mm
1.49in
38mm
2.36in
59.9mm
0.24in
6.1mm
10.75in
273.1mm
8.65in
219.7mm
11.60in
294.6mm
9.51in
241.6mm
1.49in
38mm
2.36in
59.9mm
0.24in
6.1mm
10.75in
273.1mm
8.65in
219.7mm
Note:
some trial and error is involved to determine the color
Formula and Paint aPPlication. a dust Free environment
is critical For oPtimum Painting
4. Using a small touch-up gun or cap spray gun, with a #3 tip for
painting, set the nozzle with a medium to wide fan, and set the
pressure regulator to 60 psi.
5. Lightly spray the front of the bezel in three quick strokes, from
approximately 10 inches away.
6. Paint at a slight angle (approximately 45 degrees) to ensure
that the paint covers the sidewalls of the bezel. Only a very
light coat of paint is needed on the surface.
7. Let the paint set for one minute, turn the bezel 90° and repeat
the painting process for all sides.
11.60in
294.6mm
9.51in
241.6mm
1.49in
38mm
2.36in
59.9mm
0.24in
6.1mm
10.75in
273.1mm
8.65in
219.7mm
