CM-IW2000 V2 Instruction Manual
2
Introduction
The iPort
®
Control Mount is an in-wall mounting platform system
that allows an iOS device to become an integral part of your home
control system through wireless applications. Before installing
and using the CM-IW2000 V2, please read and follow all of the
instructions in this manual carefully.
System Capabilities:
• Rigidly supports iPad and provides an elegant appearance
• Charges iPad while it is mounted
iPort Control Mount Box Contents:
(1) iPort in-wall mounting system
(1) Power wall plate
(1) Regulated power supply
(1) Installation cut-out template
(1) Instruction manual
(1) Suction cup removal tool
(1) Charging circuit board assembly
(10) Machine screws with integral washers
Required Tools
The following tools are required to install the iPort:
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Wire cutters and wire strippers
• Sheet rock saw (for retrofitting into an existing wall)
Selecting an Installation Location
The Control Mount is designed for use in normal interior
environments. When selecting location for the Control Mount,
please consider the following:
• Do not use the Control Mount outside or in a humid or wet
environment. It is not waterproof or water-resistant.
• The Control Mount cut-out must have enough depth within
the wall cavity for the Control Mount and its connections.
• Check for a strong Wi-Fi signal at the mounting location using
the iPad that is to be installed in the Control Mount.
Figure 1: Rear Connection
Wire Openings
2
1
3
4
POWER
INTERNET
WIRELESS
ETHERNET PORT
To Audio
Wall Plate
CM-IW100T
®
U.S. Patent No. 7,493,142
Additional Patents Pending
Designed and Engineered in the USA
33-5203 4-09
2
1
3
4
POWER
INTERNET
WIRELESS
ETHERNE
T PORT
To
Aud
io
Wal
l P
lat
e
CM
-IW
100
T
®
U.S. Patent No. 7,493,142
Additional Patents Pending
Designed and Engineered in the USA
33-5203 4-09
