SECTION III
Operation
Page 3.46
BP+2.9X
11/95
3.6 UPS Operating Procedures (continued)
3.6.3
UPS Maintenance Menu (continued)
3.6.3.5
Password Maintenance Menu (continued)
2. Press
to obtain this screen. There
are four (4) levels of passwords. Press as often
as necessary to reach the desired level. The
number in the lower left will change, indicating
the level attained. (NOTE: You can not go
beyond the level for which the system is set
when you start.)
3. Press
. The system will ask you to
confirm the password level.
4. Press
as requested in the previous
message. You are now ready to modify the
password. Follow the procedure you used in
steps 3 through 6, pages 3.25 and 3.26 to get
into the UPS Maintenance Menu. When you
have finished, press
.
5. You will see this message briefly
flashed on the screen –
6. Then this message will appear again. It
is necessary to repeat step 4, entering the new
password again. Then press
.
7. Press
to save the new password.
No Password
Password
Menu
Confirm
Yes = UP No = DN
Enter
Password
0
Verify
Password
Enter
Password
0
Save Changes?
Yes = UP No = DN
