SECTION III
Operation
Page 3.39
BP+2.9X
11/95
3.6 UPS Operating Procedures (continued)
3.6.3
UPS Maintenance Menu (continued)
3.6.3.4.3
Communications Menu (continued)
NOTE 2: COM1 and COM2 in some of the following displays will apply only to an
optional modem or RS232 customer interface described fully in Section
VII. They can be skipped by pressing until you get to step 48.
37. Press once to obtain one of the
“Com 1 Display screens. Press
or
to obtain
another of these three screens, as desired.
Pressing
will display the “Save Changes?”
screen. User Interface enables the UPS to
communicate in a standard ANSI terminal
format (VT100 emulation or equivalent). P-Rec
Proto allows computer to computer
communications with user developed software
per the protocol provided in section VII or
optional Windows based UPS Manager Plus ™
software. BCM Proto enables communications
with optional Onlinet® network power
management software.
38. Pressing
will select the desired
program and will bring back the previous COM1
screen.
39. Press once to get to this screen. If
you wish to change the Com 1 baud rate, press
to increase baud rate from 2400 to 9600, or
press
to decrease from 9600 to 2400.
Pressing
will display the “Save Changes?”
screen.
UPS Manager Plus™ is a trademark of International Power Machines.
Onlinet® is a registered trademark of Exide Electronics Group.
COM1 Display
User Interface
COM1 Display
P-Rec Proto
COM1 Display
BCM Proto
Save Changes?
Yes = UP No = DN
COM1 Baud Rate
2400
