Game Controller for N-Switch
User Guide(PG-9162Y/PG-9162B)
Illustration for buttons function
Basic Operation:
Wireless connection mode
1. Click "Controllers"-"Change Grip/Order" in the main menu interface of the N-Switch, enter
gamepad pairing mode;
2.Press and hold "HOME" 3 seconds to enter pairing status, LED blink rapidly in the form of
marquee, the gamepad auto pairing with the console, the corresponding LED of the gamepad
always on after successfully connecting.
3.If the gamepad connected before, you can press "HOME" directly, LED quick slow in the form
of marquee, it will auto re-connect.
Wired connection mode
1. Please ensure "Pro Gamepad wired connection" are in the open position in the system
settings of N-Switch console before using wired connections.
2. Gamepad connect with Switch Dock via USB data cable, can be used as a wired gamepad,
the corresponding LED of the gamepad slow blink.
3. Unplug the USB cable, gamepad enter wireless mode, will auto re-connect with the console.
TURBO function
1. Action buttons include (A/B/X/Y/L/ZL/R/ZR), all the 8 buttons can be set manually with TURBO
function.
2. Setting method: Press and hold down one of action buttons, and then press the TURBO
button to enable the TURBO function; hold down the action button, then press CLEAR button to
cancel the TURBO function;
3. When gamepad is power off, shut down or restarted, the Turbo function is automatically
cleared. To enable the TURBO mode, you need to reset it.
Charging/sleep/wake up/ power off function of Gamepad
1. Charging function:
a. When the power is low, the correspnding LED blink rapidly;
b. When charging, the correspnding LED slow blink;
c. When fully charged in working condition, the correspnding LED will be always on;
d. When fully charged in shut-down status, the correspnding LED will turn off.
2. Sleep / wake up / off function:
a. The gamepad will enter sleeping mode automatically if the screen of N-Switch is off or there is
no operation within 5 minutes.
b. Long press the "HOME" for 5 seconds to turn off the gameapd, then all the LED indicators will
turn off;
c. Press the HOME button to wake up and reconnect when you want to restart it;
Application Introduction:
1.This Gamepad is used for playing N-Switch games;
2. Support connect with N-Switch console via wireless connection, also support wired connect
with N-Switch Dock to playing N-Switch games.
3.Function button of this gamepad is one-one corresponding with N-Switch_pro gamepad; The
gamepad support TUBRO and Six axis gyroscope function & vibration function.
* Due to the official game platform software upgrade or source code changes and other not
resist factors caused of some games can not be played or connected with our gamepad. Our
company has no responsibility, we reserves the right of final interpretation for this.
Left 3D &
downward L3
Right 3D &
downward L3
Screenshot
button
D-pad
LED
indicatior
"-"button
"+"button
1. Please do not store this product in wet or high-temperature areas.
2. Don't knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary
damage to the product.
3. Non professional personnel should not disassemble the product, otherwise it will not be
covered in the after-sales warranty service.
User Manual x1
Game Controller x1
Basic Operation:
Electrical Parameters:
Correction methods
In the case of not connected with N-Switch console, lay the gamepad flat, press ‘-’ and ‘B’
button first, and press "HOME" at the same time, LED blink alternately, then press ‘+’ button,
LED blink in form of marquees, then wait until the LED turn off, correct successfully. Please
don't move the gamepad during correction.
1.Input voltage/ current:DC5V/500mA;
2.Working voltage/ current:DC3.7V/ 20mA;
3.Max working current: <200mA;
4.Continuous gameplay time: >8H;
5.Charging time:about 2 hours;
6.BT 4.0 transmission distance: ≤ 8M;
7.Battery capacity:380mAh;
8.Standby time: up to 30days once fully charged.
Notes:
Accessories List
:
Type-C Charging Cable x1
R/ZR
L/ZL
HOME
TURBO
Type-C port
ABXY
X
B
A
Y
X
B
A
Y