LIP-9071
iPKTS
User Guide
91
12.1.3.1 802.1x Setting
LIP-9071 phone supports Layer 2 (Ethernet) security employing 802.1x port-based Network Access Control.
EAP-MD5 method is used for ID and password authentication for access to the network. The ID and
password can be up to 128 characters each.
1. 802.1x Activation
Select whether the telephone responds or not responds as a supplicant.
2. 802.1x ID
The IP Phone requires accessing the network by specifying a username and password when supplicant
option enabled.
Authentication user names and passwords for each Supplicant device must be provisioned in the
RADIUS server
3. Password
The IP Phone is challenged to access the network by specifying a username and password when
supplicant option is enabled.
Authentication user names and passwords for each Supplicant device must be provisioned in the
RADIUS server
4. Pass Through Mode
The IP Phone has Ethernet Port for PC or other Ethernet device. The IP Phone need control 802.1x
traffic of that port. There are three modes for that.
o
enable: IP Phone pass 802.1x traffic from network to PC Port.
o
disable: IP Phone block 802.1x traffic from network to PC Port.
o
Proxy Log Off: IP phone send 802.1x Log Off packet instead of the device which is connected to
PC Port, when the device is disconnected from PC port.
Summary of Contents for LIP-9071
Page 155: ...LIP 9071 iPKTS User Guide 142 ...
